diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 178 |
1 files changed, 155 insertions, 23 deletions
@@ -1,16 +1,142 @@ # Sequence uploader -This repository provides a sequence uploader for the +This repository provides a sequence uploader for the COVID-19 Virtual Biohackathon's Public Sequence Resource project. You can use it to upload the genomes of SARS-CoV-2 samples to make them publicly and freely available to other researchers. -# Run +To get started, first [install the uploader](#installation), and use the `bh20-seq-uploader` command to [upload your data](#usage). -Run the uploader with a FASTA file and accompanying metadata: +# Installation + +There are several ways to install the uploader. The most portable is with a [virtualenv](#installation-with-virtualenv). + +## Installation with `virtualenv` + +1. **Prepare your system.** You need to make sure you have Python, and the ability to install modules such as `pycurl` and `pyopenssl`. On Ubuntu 18.04, you can run: + +```sh +sudo apt update +sudo apt install -y virtualenv git libcurl4-openssl-dev build-essential python3-dev libssl-dev +``` + +2. **Create and enter your virtualenv.** Go to some memorable directory and make and enter a virtualenv: + +```sh +virtualenv --python python3 venv +. venv/bin/activate +``` + +Note that you will need to repeat the `. venv/bin/activate` step from this directory to enter your virtualenv whenever you want to use the installed tool. + +3. **Install the tool.** Once in your virtualenv, install this project: + +```sh +pip3 install git+https://github.com/arvados/bh20-seq-resource.git@master +``` + +4. **Test the tool.** Try running: + +```sh +bh20-seq-uploader --help +``` + +It should print some instructions about how to use the uploader. + +**Make sure you are in your virtualenv whenever you run the tool!** If you ever can't run the tool, and your prompt doesn't say `(venv)`, try going to the directory where you put the virtualenv and running `. venv/bin/activate`. It only works for the current terminal window; you will need to run it again if you open a new terminal. + +## Installation with `pip3 --user` + +If you don't want to have to enter a virtualenv every time you use the uploader, you can use the `--user` feature of `pip3` to install the tool for your user. + +1. **Prepare your system.** Just as for the `virtualenv` method, you need to install some dependencies. On Ubuntu 18.04, you can run: + +```sh +sudo apt update +sudo apt install -y virtualenv git libcurl4-openssl-dev build-essential python3-dev libssl-dev +``` + +2. **Install the tool.** You can run: + +```sh +pip3 install --user git+https://github.com/arvados/bh20-seq-resource.git@master +``` + +3. **Make sure the tool is on your `PATH`.** THe `pip3` command will install the uploader in `.local/bin` inside your home directory. Your shell may not know to look for commands there by default. To fix this for the terminal you currently have open, run: + +```sh +export PATH=$PATH:$HOME/.local/bin +``` + +To make this change permanent, assuming your shell is Bash, run: + +```sh +echo 'export PATH=$PATH:$HOME/.local/bin' >>~/.bashrc +``` + +4. **Test the tool.** Try running: + +```sh +bh20-seq-uploader --help +``` + +It should print some instructions about how to use the uploader. + +## Installation from Source for Development + +If you plan to contribute to the project, you may want to install an editable copy from source. With this method, changes to the source code are automatically reflected in the installed copy of the tool. + +1. **Prepare your system.** On Ubuntu 18.04, you can run: + +```sh +sudo apt update +sudo apt install -y virtualenv git libcurl4-openssl-dev build-essential python3-dev libssl-dev +``` + +2. **Clone and enter the repository.** You can run: + +```sh +git clone https://github.com/arvados/bh20-seq-resource.git +cd bh20-seq-resource +``` + +3. **Create and enter a virtualenv.** Go to some memorable directory and make and enter a virtualenv: + +```sh +virtualenv --python python3 venv +. venv/bin/activate +``` + +Note that you will need to repeat the `. venv/bin/activate` step from this directory to enter your virtualenv whenever you want to use the installed tool. + +4. **Install the checked-out repository in editable mode.** Once in your virtualenv, install with this special pip command: + +```sh +pip3 install -e . +``` + +5. **Test the tool.** Try running: + +```sh +bh20-seq-uploader --help +``` + +It should print some instructions about how to use the uploader. - python3 bh20sequploader/main.py example/sequence.fasta example/metadata.json +## Installation with GNU Guix -# Add a workflow +For running/developing the uploader with GNU Guix see [INSTALL.md](./doc/INSTALL.md) -get your SARS-CoV-2 sequences from GenBank in seqs.fa +# Usage + +Run the uploader with a FASTA file and accompanying metadata file in [JSON-LD format](https://json-ld.org/): + +```sh +bh20-seq-uploader example/sequence.fasta example/metadata.json +``` + +## Workflow for Generating a Pangenome + +All these uploaded sequences are being fed into a workflow to generate a [pangenome](https://academic.oup.com/bib/article/19/1/118/2566735) for the virus. You can replicate this workflow yourself. + +An example is to get your SARS-CoV-2 sequences from GenBank in `seqs.fa`, and then run a series of commands ```sh minimap2 -cx asm20 -X seqs.fa seqs.fa >seqs.paf @@ -19,30 +145,36 @@ odgi build -g seqs.gfa -s -o seqs.odgi odgi viz -i seqs.odgi -o seqs.png -x 4000 -y 500 -R -P 5 ``` -from https://github.com/virtual-biohackathons/covid-19-bh20/wiki/Pangenome#pangenome-model-from-available-genomes +Here we convert such a pipeline into the Common Workflow Language (CWL) and +sources can be found [here](https://github.com/hpobio-lab/viral-analysis/tree/master/cwl/pangenome-generate). -# Installation +For more information on building pangenome models, [see this wiki page](https://github.com/virtual-biohackathons/covid-19-bh20/wiki/Pangenome#pangenome-model-from-available-genomes). + +# Web Interface + +This project comes with a simple web server that lets you use the sequence uploader from a browser. It will work as long as you install the packager with the `web` extra. -This tool requires the arvados Python module which can be installed -using .deb or .rpm packages through -https://doc.arvados.org/v2.0/sdk/python/sdk-python.html. The actual -code lives [here](https://github.com/arvados/arvados/tree/master/sdk/python) and -suggests a local install using +To run it locally: - apt-get install libcurl4-openssl-dev libssl1.0-dev - pip3 install --user arvados-python-client +``` +virtualenv --python python3 venv +. venv/bin/activate +pip install -e .[web] +env FLASK_APP=bh20simplewebuploader/main.py flask run +``` + +Then visit [http://127.0.0.1:5000/](http://127.0.0.1:5000/). -Next update +## Production - export PATH=$PATH:$HOME/.local/bin +For production deployment, you can use [gunicorn](https://flask.palletsprojects.com/en/1.1.x/deploying/wsgi-standalone/#gunicorn): -## Install with GNU Guix +``` +pip3 install gunicorn +gunicorn bh20simplewebuploader.main:app +``` -Set up a container: +This runs on [http://127.0.0.1:8000/](http://127.0.0.1:8000/) by default, but can be adjusted with various [gunicorn options](http://docs.gunicorn.org/en/latest/run.html#commonly-used-arguments) - ~/opt/guix/bin/guix environment -C guix --ad-hoc python openssl python-pycurl nss-certs - pip3 install --user arvados-python-client -Pip installed the following modules - arvados-python-client-2.0.1 ciso8601-2.1.3 future-0.18.2 google-api-python-client-1.6.7 httplib2-0.17.1 oauth2client-4.1.3 pyasn1-0.4.8 pyasn1-modules-0.2.8 rsa-4.0 ruamel.yaml-0.15.77 six-1.14.0 uritemplate-3.0.1 ws4py-0.5.1 |