From f6debd49499f0cb4cd5abfb123a9d4c5be0c5c83 Mon Sep 17 00:00:00 2001 From: Ludovic Courtès Date: Sun, 28 Oct 2007 21:27:34 +0100 Subject: Update generated files. --- ChangeLog | 12 +++ INSTALL | 296 ++++++++++++++++++++++++++++++++++++++++++++------------------ po/fr.po | 14 ++- 3 files changed, 233 insertions(+), 89 deletions(-) diff --git a/ChangeLog b/ChangeLog index 1443955..c1a07bf 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,15 @@ +2007-10-28 gettextize + + * m4/gettext.m4: New file, from gettext-0.16.1. + * m4/iconv.m4: New file, from gettext-0.16.1. + * m4/lib-ld.m4: New file, from gettext-0.16.1. + * m4/lib-link.m4: New file, from gettext-0.16.1. + * m4/lib-prefix.m4: New file, from gettext-0.16.1. + * m4/nls.m4: New file, from gettext-0.16.1. + * m4/po.m4: New file, from gettext-0.16.1. + * m4/progtest.m4: New file, from gettext-0.16.1. + * configure.ac (AC_OUTPUT): Add po/Makefile.in. + # do not edit -- automatically generated by arch changelog # arch-tag: automatic-ChangeLog--skribilo@sv.gnu.org--2006/skribilo--devo--1.2 # diff --git a/INSTALL b/INSTALL index 30507e7..5458714 100644 --- a/INSTALL +++ b/INSTALL @@ -1,110 +1,234 @@ -Here is the procedure for compiling and installing SKRIBE on a Unix system. +Installation Instructions +************************* - -Requirements -************ +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006 Free Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + +Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + +You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + +Installation Names +================== - - GNU-MAKE is required. - - BIGLOO 2.6b (or later) *or* SKTLOS 0.56 is required. +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + +Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. -Summary of a SKRIBE compilation, test and installation -****************************************************** + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. - $ ./configure --with-bigloo|--with-stklos - $ make - $ make install +Specifying the System Type +========================== - This procedure will self test SKRIBE because it will compile the various - Skribe documents that implement the Skribe documentation. +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM -Configuring SKRIBE -****************** +where SYSTEM can have one of these forms: - Configuring SKRIBE/BIGLOO - ************************* + OS KERNEL-OS - 1.a Edit the `./etc/bigloo/configure' file and set the variables defined in the Use - section (e.g. `bindir', `libdir', `mandir' and `docdir'). Note that - if you leave these variable definitions blank the installation procedure - will install Skribe at the same location as Bigloo. + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. - 1.b Configure Skribe for your machine by invoking: - `./configure --with-bigloo' - or - `./configure --with-bigloo --prefix ' - or - `./configure --with-bigloo --bigloo=' - When the system is ready to be compiled, `configure' prints - the message `configuration done.'. +Sharing Defaults +================ - The following command: - `./configure --with-bigloo --help' - displays the available options. - - The default configuration uses the C back-end. To produce a JVM version of - SKRIBE, uses: +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. - `./configure --with-bigloo --jvm' +Defining Variables +================== - Configuring SKRIBE/STKLOS - ************************* +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). - 1. Configure Skribe for your machine by invoking: - `./configure --with-stklos' - or - `./configure --with-stklos --prefix ' +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash -Compiling SKRIBE -**************** +`configure' Invocation +====================== - 2. Type: - `make' +`configure' recognizes the following options to control how it operates. - This will compile: - - the Skribe compiler: skribe - - the Texinfo to Skribe translator: skribeinfo (*) - - the BibTex to Skribe translator: skribebibtex (*) - - the Skribe documentation (in manuals/man, manuals/user and - manuals/expert). +`--help' +`-h' + Print a summary of the options to `configure', and exit. - (*) this tools is compiled only when SKRIBE is compiled with BIGLOO. +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. -Installing SKRIBE -***************** +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. - 3. Type: - `make install' +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). - This install, the Skribe compiler, the Skribeinfo compiler, the - various Skribe back-ends, the variable Skribe style files and - the Skribe documentation. +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. - This does not install the skribe.el emacs package. +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. - -Cleaning SKRIBE -*************** - - 4. Once, installed, you can type: - `make clean' - to remove all the useless files. - - -Uninstalling SKRIBE -******************* - - 5. To uninstall Skribe: - `make uninstall' - - -Unconfiguring SKRIBE -******************** - - 6. If you plan to re-install Skribe on a new platform. Before performing - the all installation process (step 1 to 5) you must first remove the - current configuration. For this type: - `make distclean' - - diff --git a/po/fr.po b/po/fr.po index f199bd4..1b55930 100644 --- a/po/fr.po +++ b/po/fr.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: ludovic.courtes@laas.fr\n" -"POT-Creation-Date: 2007-07-04 18:24+0200\n" +"POT-Creation-Date: 2007-10-28 21:26+0100\n" "PO-Revision-Date: 2007-02-05 16:02+0100\n" "Last-Translator: Ludovic Courtès \n" "Language-Team: fr \n" @@ -81,10 +81,18 @@ msgid "undefined bibliography error: ~a~%" msgstr "erreur de bibliographie indéfinie : ~a~%" #: src/guile/skribilo/biblio/template.scm:150 -#: src/guile/skribilo/biblio/template.scm:202 +#: src/guile/skribilo/biblio/template.scm:210 msgid "Technical Report" msgstr "Rapport Technique" -#: src/guile/skribilo/biblio/template.scm:178 +#: src/guile/skribilo/biblio/template.scm:180 +msgid "editor" +msgstr "" + +#: src/guile/skribilo/biblio/template.scm:181 +msgid "Chapter " +msgstr "" + +#: src/guile/skribilo/biblio/template.scm:186 msgid "PhD Thesis" msgstr "Thèse de doctorat" -- cgit v1.2.3